The contractor sought advice re the surfacing requirements at a Sydney Public school.
They were required to resurface and rejuvenate a playground area using the existing play equipment.
From Photographs and measurements supplied to us we were able to determine correct fall heights and plan out the correct fall zones for all the equipment.
The contractor used this information to plan the surface and to determine appropriate depths of material required to meet the Fall Heights.
At the completion of the base works we undertook several drop tests around the equipment to ensure the required fall heights could be met.
This allowed the contractor to make any adjustments to the depth of the base PRIOR to laying the topcoat.
As result of the testing, some minor changes were made to the surface and the contractor was able to install the top coat, confident that the surface would pass any subsequent testing.